JR-Wheels Wheel Spacers JRWS2 Silver Aluminum

There are 6 different types of spacers from JR-Wheels, so pay attention while ordering!

JRWA1: These spacers are for cars where bolts are used to mount the rims. These spacers not only change the offset of the rims, but also change the way of mounting the rims from bolts to wheel nuts.

JRWA2: These spacers are intended for cars where bolts are used to mount the wheels. These spacers only change the offset of the rims, as bolts must still be used to mount the rims. 

JRWA3: These spacers are meant for cars where nuts are used to mount the rims. These spacers only change the offset of the rims, because to mount the rims, nuts must still be used. 

JRWA4: These spacers not only change the offset of the rims, but also the pitch size.

JRWS1: These are traditional spacers that only change the offset of the rims.

JRWS2: These are traditional spacers that only change the offset of the rims. In addition, these spacers also have a hub hole where the rims are mounted to improve wheel balance. NOTE: These do NOT come with bolts.

Note:

All spacers are sold per set of 2, so 2 sets are needed for a complete car.

Spacer thickness is in mm per spacer so if you purchase a set of 15mm the entire axle will be 30mm wider.

Wheel bolts of different sizes are used for spacers of different sizes.

There are also different types of bolts such as; Hex bolts, Tuner bolts, Star bolts designed to fit aftermarket tuning wheels.

Below are what are the most common applications:

Standard (28mm)

Long (32mm to 55mm)

26mm - 28mm standard length, are used for mounting wheels without spacers

32mm/33mm = for 3mm and 5mm spacers

39mm/40mm = for 10mm/12mm spacer

45mm = for 15mm spacers

50mm = for 20mm spacers

55mm = for 25mm/30mm spacers

CAUTION: Make sure you have at least 6 full turns on your bolt when mounting a wheel with spacers