BC Racing Coilover RM-MA Adjustable BMW 1 Serie

BC Racing offers the following levels of coilover kits;

V1 Series: Street use ‐ Entry Level (Stage 1)
BR Series: Street & Track use - Pro (Stage 2)
DS Series: Track use - Digressive (Stage 2.1)
RM Series: Track use ‐ Inverted Dampers (Stage 3)
ER Series: Track use ‐ 2-Way Adjustable (Stage 4)
HM Series: Track use ‐ 2-Way Adjustable - Inverted Dampers (Stage 4.1)
ZR Series: Track use ‐ 3-Way Adjustable (Stage 5)

RM Series: Track-use - inverted dempers (Stage 3)
BC Racing’s inverted RM Series model includes all of the great features of the BR Series model, then takes everything up a notch! The inverted coilover system moves vital damper fluid away from detrimental heat sources to avoid overheating the fluid which can cause damper fade under extreme use. Other advantages are the reduction of unsprung weight by moving the majority of the coilover mass to the chassis of the vehicle where weight can be more easily shaved. This is a durable coilover setup for those looking to attack a road course, hill climb or tarmac rally.

* Inverted mono-tube shock design
* Height Adjustment Via Shock Body, Not Spring
* 30-Clicks Of Damping Adjustment (Compression/Rebound) Simultaneously
* Front Camber Plates Standard On Applicable Kits
* Rear Camber Plates Standard On Applicable Kits
* Custom Spring Rates Available For Most Applications
* Attention: As these sets are for track use only they can make noises that for some users may not be acceptable for daily/street use.
* In the box: 4 Coilovers including Dampers, Springs, Lower Mounts, Topmounts (if applicable), Adjuster Wrenches, Warranty Card with Serial Nr.

Standard BC Racing kits are approximately 2.5cm below OEM ride height at max high, and approximately 6.5-7cm below OEM ride height at max low. Extreme drop kits are approximately 5cm below OEM ride height at max high, and are approximately 10cm below OEM ride height at max low, depending on the coilover kit.

Note: Pictures online are mostly general (sample) images of the RM series, it does not always show the actual set for your car.

Subseries Info:
The RM-Series has the following subseries, often depending on the original suspension design that your car manufacturer used (like Mcpherson, double wishbone or A-Arm);

RM-MH:
– Front: Inverted Damper With Pillow Ball Top Mount (Camber Adjustable)
– Rear: Inverted Damper with Pillowball Top Mount (Camber Adjustable Where Applicable)

RM-MA:
– Front: Inverted Damper With Pillow Ball Top Mount (Camber Adjustable)
– Rear: Standard Damper with Rubber Top Mount

If in doubt which set you like to order; Please contact us by email for advise.